HIGH SPEED HEAVY DUTY ROD BREAKDOWN MACHINES FOR COPPER / ALUMINUM RODS,
With continuous resistance In-Line Annealer, Pack Coiler, Spooler unit, complete with panel and control desk provided for operator for smooth operation of the line, Pit-Pot type bright annealing furnace can be provided separately.
Bobbin Size : 500/630 mm
Description of Heavy Duty Rod Breakdown Machines :
RBD Machines can draw both Aluminum / Copper from 9.5 / 8 .0 mm rods to finished size : 2 mm / 1.40 mm. These machines are gear driven and are available in different configurations of 13 die , 11 die and 9 die as per customers requirements. The wire is coiled on bobbins 500/ 630 mm in dual / single spoolers. The machine is supplied with Pointing & Stringing Machine and also Control Panel. A control desk is provided near the RBD to enable smooth operation of the line.
Continuous Resistance Inline Annealer
The copper wire from the outlet is fed into an continuous resistance inline annealer available from 40 KW to 350 KW annealing power and 800 Amp. to 7000 Amps current (max)
Bright Annealing Furnace : Pit –Pot Type
A Bright Annealing Furnace , Pit –Pot type can also be provided in lieu of the continuous inline annealer , these have capacities of 1 Ton and 1.2 tons and comprise of one furnace, three pots mounted on trolleys and vacuum pump and panel board.
Vertical Pack Coiler :
A vertical pack coiler can also be used for continuous winding of drawn annealed wire from 2 mm to 4.4 mm. The wire will enter the coiler from input side guided through a set of rollers and wrapped on the block drum which will finally come out through spring loaded guides into the Coiler basket
INTERMEDIATE FINE WIRE DRAWING MACHINE WITH INLINE ANNEALER
The machine is used for drawing copper / aluminum wires of different diameters. It consists mainly of wire pay off unit, wire drawing unit complete with gear train, continuous annealer, dancer unit , spooler , wire pointing & stringing machines.
The machine can draw wire continuously from 1.5 to 0.3 mm as per the customers requirements, we can suggest medium / fine wire drawing machines, with line speed of 40 meters / second.